Pricing
can vary tremendously from shop to shop and it's one of
those compromises that, you get what you pay for.
Below you will find some basic
price
packages and guide lines for installing Body Kits.
Basic Installation-
Full body kit installation and paint. Includes basic
prep for paint and removing most common fiberglass
imperfections.
$1700 to $2500
Extreme Installation-
Show quality, no imperfections, totally boxing in or
utilizing factory splash shields and fender liners.
Side skirts molded in and WILL
NOT CRACK.
This installation looks better than factory
and with the use of brackets, mesh and our installation kit it's the most durable set up that we have ever seen
on any car.
$3000 to $4500
Optional -
Chip guard protection
with this service is only
$300.00.
We Specialize in Wide Body Installations-
There are several types of wide body kits available today
and these are done on a case by case basis and usually
requires us to paint the car allover or come close to it.
Our preference is molding the parts in when we do wide
bodies but, bolt/rivet on are an option for our Drifting
or Full Race Customers.
$5000 to $10,000
Custom Wide Body Creations-
We can custom build you a wide body kit using fiberglass or
urethane parts. pricing for this is budget specific
and, if you have to ask you may not be ready for it.
$10,000 and up
Custom
Mod / Repair Urethane parts- Weather it's repairing
urethane, custom cut openings for fog lamps or molding into a
metal panel, we have perfected the method
.
Using this method we can mold a lip kit into a factory
bumper and it looks like a one piece kit, or mold a "urethane"
spoiler into your "steel"
rear hatch. It looks amazing.
Custom Fit Body Kits-
These are done for the hard to find applications. If
you have a car that you are having trouble finding a kit for
or you can't find a kit at all, we can take a body kit and alter
it to fit your application.
These are done on a case
by case basis and are more expensive than a normal install,
this
applies
to fiberglass as well as urethane.
Body Kit Engineering-
This is an installation where you need to be able to easily
remove the kit for part replacement or repair, usually done
on cars intended for Lambo doors, drifting or sanctioned
racing. There installed with bracing, clips and
fasteners that will allow for removal and be structurally
stronger then a normal kit.
Custom Car builder- We
can completely build, finish or repair your kit car
project or build a
complete turn key custom tuner car.
As you will find
out, depending how many shops you ask, that's how many
different prices you will get. If your project is
intended for shows, that's a whole different pricing
structure and ultimately depends on your budget.
You can spend $10,000 to $20,000 or more on a first class
install with all over paint and some graphics.
We would like to
have a one price fits all but unfortunately there are too
many variables to deal with.
Why Buy Quality?
Pay more for a quality kit and you will save on the install,
kits are cheaper than body labor.
Unfortunately Body
Shop Service is a get what you pay for item (or at least
it should be). If you
want it cheap to save a lot of money?.
Lets see what can happen when its about cheap and
not about quality.
After reading the
above post, ask yourself; if this happened to you, how
much money would you save?
Main Menu
Saving Money?
Body Kit Installation
Custom Made Kits
Custom Paint
Composite Repair
Lambo Door Install
Terms of Service
Get an Estimate
